How to Assemble a Garden Party Dollhouse & Car

Quick answer

Start by sorting all parts and hardware, then build the base and garage, stack the four floors with the working elevator, and finish by attaching the car and treehouse.

Assembly steps

1. Step 1: Build the base and garage: Attach the ground-floor base panel to the side walls using the provided screws. Install the garage door frame and ensure the opening is square. Place the included sports car inside the garage to check fit. Common mistake: Forgetting to insert the garage door track before securing the roof.
2. Step 2: Install the elevator mechanism: Thread the elevator cable through the pulleys on each floor as shown in the manual. Secure the elevator car to the cable and test it moves freely. Do not overtighten the cable—it needs slight slack to operate. Checkpoint: The elevator should glide up and down without catching on floor edges.
3. Step 3: Stack the remaining floors: Align the second, third, and fourth floor panels using the numbered stickers. Attach each floor to the corner posts with screws. Use a level to ensure each floor is flat before adding the next. Common mistake: Skipping the level check can cause the entire structure to lean.
4. Step 4: Attach the rooftop patio and treehouse: Screw the rooftop patio railing into place, then attach the treehouse arm to the side of the dollhouse. Hang the tire swing from the treehouse hook. Ensure the swing moves freely. Checkpoint: The treehouse arm must be firmly anchored to support the swing's weight.
5. Step 5: Secure the car and final touches: Place the sports car in the garage. Add the included furniture pieces to each room. Check all screws are tight and no sharp edges are exposed. Final check: Ensure the elevator and swing work before letting children play.

Product details

• Garden Party Dollhouse & Car: The KidKraft Garden Party Dollhouse is a four-story, five-foot tall wooden dollhouse with a rooftop patio, treehouse with tire swing, working elevator, and an included sports car. Understanding the scale and features helps you plan assembly space and identify all parts before starting.