How to Set Up Your Nantucket Table Set

By Destinations for Playing, Exploring & Living | Published: 2026-10-26

Category: How-to Guides

Step-by-step guide to assembling the KidKraft Nantucket Table with Bench and 2 Chairs, including tips for a sturdy, safe kids' dining set.

Quick answer

Assemble the KidKraft Nantucket Table with Bench and 2 Chairs by following the included instructions step by step, using a Phillips screwdriver and checking for tight connections to ensure a stable kids' dining set.

Before You Start: Tools and Workspace

Clear a large, flat area like a carpeted floor or a clean table to avoid losing small parts. You will need a Phillips-head screwdriver (not included); a power drill with a low torque setting can speed things up but be careful not to overtighten and strip the wood.

The Nantucket set uses pre-drilled holes and cam lock screws. Lay out all pieces and hardware, grouping similar parts together. Check that you have the two chairs, one bench, and the table top and legs before starting.

Assembly Order Matters

Always attach the legs to the table top first, then assemble the bench, and finally the chairs. This order prevents the table from wobbling if you reverse the sequence. The bench and chairs use similar hardware but have different orientations—the bench is wider and uses longer crossbars.

Step-by-Step Assembly Guide

Attach Table Legs: Place the table top upside down on a soft surface. Align each leg with the pre-drilled holes and insert the cam lock screws. Tighten them firmly but do not overtighten—this can crack the wood. Check that all four legs are level before flipping the table right-side up.
Assemble the Bench: Connect the bench seat to the two leg supports using the provided screws. The bench is wider than the chairs, so double-check you are using the longer crossbars. Tighten all screws until the bench feels solid but can still be adjusted slightly. If the bench wobbles, loosen the screws, re-align the legs, and retighten evenly.
Assemble the Chairs: For each chair, attach the backrest to the seat first, then add the front legs. Use the shorter screws for the chair arms. Ensure the backrest is centered—it can shift during tightening. Test each chair by sitting gently; if it rocks, check that all four feet touch the floor evenly.
Final Check and Placement: Place the table, bench, and chairs on a level floor. Tighten any loose screws with a screwdriver (avoid a drill to prevent stripping). Wipe the set with a damp cloth to remove any dust from assembly. For stability on hard floors, consider adding felt pads to the bottom of each leg.

Product Details

Nantucket Table with Bench & 2 Chair Set - White: The KidKraft Nantucket Table with Bench and 2 Chairs features wainscoting-style paneling and gentle curves inspired by New England design. This classic style means the set works well in a playroom or dining area, but the decorative panels require careful alignment during assembly to avoid gaps.
Nantucket Table with Bench & 2 Chair Set - White